This machine is high frequency machine. The body is small, light weight and nearly no radiation. It has excellent image quality, portable storage, save more space. It uses high frequency and DC international power supply. All of the components installed in the central PC board concentrated. High voltage generator and electron tubes, all of them are insulation vacuum, sealed stereotype protection. There are also manual buttons installed on the surface of shell, as well as batteries and charges. This unit mainly suitable for oral pre-treatment for learning internal organizational structure, root canal therapy, den-tal implant and so on, is indispensable in daily life clinic equipment, It also can connect with sensor( sensor is not included), is great convenience.
- Sensor is not included, If you want to see the images on the computer,you need to buy a sensor or buy our den-tal film viewer of ASIN B087G3S1PZ, you can view the films by it.
Structure and Function Key
Turning on the device
Press the power switch button for three seconds, all characters will appear on the LCD screen and the buzzer sounds, then loosen finger ,the device will be ready for 5 seconds.Exposure condition will be displayed on the screen as the last time condition- it can saving the last time operation.The device will be turned off automatically if there is no any operation for 5 minute
Setting exposure time
Select tooth position .Press the button 9 "Film/Sensor "(select film or sensor) or the button 8 "Adult or Children "(select adult or children) or the
button 11 to increase 0.02 sec for each step) or the button 12 to reduce 0.02 sec for each step if necessary.
Place the film(or sensor)
Put the sensor or a film in the mouth,keep film upright when select front tooth,horizontal when select back tooth.make the beam cone vertical to film or sensor.
- Press the exposure button until the buzzer sound is over.(when exposure,there is “EXP” displayed on the LCD screen,and the exposure indicator light is on.)A
- fter the exposure,the buzzer sound is over and the indicator light is off,the device enters into the cooling state,the LCD screen will display “EEE””EE””E”and some relevant software self-checking data. There will be discontinuous buzzer sound in the process of cooling until the “ready” displayed on the LCD screen,then can exposure again.
- If loosen the exposure button in the process of exposure(exposure broken off),if the exposure time less than or equal to 0.6s,the device will return to exposure state immediately;if the exposure time more than 0.6s,the system will think it is an entire exposure,then it will enter into the cooling state.the LCD screen will display “EEE””EE””E”and some relevant software self-checking data. until the “ready” displayed on the LCD screen,then can exposure again.I
- n the process of exposure,please make the device in horizontal level with both hands,don’t shake or move.make the center of the beam cone aim at the selected tooth.
Turning off the device
Press the power switch button for two seconds and then loosen finger, the device will be turned off.
- Small size, light weight, easy to carry
- Automatic storage of exposure parameters, only need one time exposure, parameters be memorized permanently
- High-brightness LCD screen display, various functions are clear at a glance
- Tact switches, smart control, the operation is more convenient.
- Suit for most of den-tal film reader machine or sensor to make the image clearer.
- Large-capacity rechargeable battery enables you to irradiate xray more than 500 times after charging one time, and it can be charged and discharged for 1000 times in its life.
- High frequency power supply, low radiation, beautiful appearance
- Developing in light room, image in one minute, immediately be used for diagnosis
- Be use of the in-tra-o-ral cavity digital imaging system
Tube focus :0.3mm×0.3mm(0.011inchx0.011inch)
The distance from skin to cone：130mm(5.11inch)
Charger input voltage：AC100V-240V±10%
- 1*Digital Machine
- 1*Protective carry Case
- 1* English manual
I need information of the equipment!
Please I am trying to get some information about the product and I do not have it yet like year of manufacture, serial number, model of the equipment and brand, also if the product is used or new all that information together. Please I really need that information or just I have to return the equipment. Please help me!! Thank you in advance!!
Cumplió todas mis expectativas
Una de las mejores compras que he hecho. De muy buena calidad y muy cómodo para trabajar
Great for portable use outside of office
Decent quality for low priceGood weight easy to use.
Mala calidad producto dañado y no me realizan reembolso
En mal estado no funciona el panel de botones de control.Y no han regresado mi dinero
It did not work
I return the advice does not work properly
Puntualidad y excelencia
Excelente producto y puntualidad en la entrega
the grip is on the right and the fire button is on the left
This is nice machine, works good, easy to use
Not Cleared by the FDA
There is no indication that this device has been cleared by the FDA. It is illegal to sell x-ray devices that have not been cleared by the FDA in the United States.