Welcome to Binge

  • Free Shipping over AED 200
  • Support 0900 - 1800
  • Free Returns
  • Secure Payments

ArmorSuit [6 Pack] MilitaryShield Screen Protector Designed for Apple Watch Series 7 45mm & Series 6/SE/5/4 44mm Max Coverage Anti-Bubble HD Clear Film


Imported From

3.9 ratings
  • Share

AED 56.43

- +

Standard Delivery: Get it to United Arab Emirates by 28-April to 02-May with free delivery on orders above AED 200

Voltage Disclaimer: Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact binge support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.



ArmorSuit MilitaryShield Designed for Apple Watch Series 7 45mm Screen Protector - Made in the USA

ArmorSuit MilitaryShield is the leading brand screen protector featuring exceptional clarity for all of your devices. It is made from the same film material that is used to protect military aircrafts, helicopters and space shuttles. MilitaryShield is also equipped with self-repairing technology to maximize the protection. The self-repairing technology works to constantly eliminate minor scratches on the film. All of our MilitaryShield products are uniquely designed to fit you devices perfectly. It's designed to provide daily protection against scratches and reduce chances of damage to your screen from impact. Best of all, it's very easy to apply.

*Made in USA*

  • Made in USA ArmorSuit MilitaryShield precise laser cutting screen protector for Apple Watch Series 7 45mm/ Series 4/5/6/SE 44mm
  • Ultra HD Clear and amazingly thin, perfectly matches the contours of your device. Easy application with flexible material is designed for maximum full coverage on curved corners and edges on your device.
  • Created from scratch-proof, ultra-tough, optically clear, military-grade, yellow-resistant material and is custom fit for each particular gadget and device with full body and screen protection.
  • MilitaryShield has self-healing technology, which helps eliminate minor scratches on the film all by itself. Significantly reduces dust, oil and fingerprint smudges.
  • Includes: ArmorSuit MilitaryShield screen protector, Installation Tools, installation instructions and Manufacturer's Lifetime Replacement Warranty. This Warranty is ONLY valid when purchased directly from an ArmorSuit's official seller on Amazon. ArmorSuit Screen Protector is a flexible thermoplastic urethane film that is built to withstand the curved state it arrives in the package. Made in USA
  • Similar Products

    Ratings & Reviews

    3.9 ratings
    Customer Reviews
    • A.

      Exactly what you think it is! This thing is perfect if you use it right!

      I have had an Apple Watch since 2015 when they first came out. I always put screen protectors on my devices because I'm honestly a pretty clumsy person. The watch especially needs one, because I am CONSTANTLY bumping into doorways and walls. I often prefer tempered glass, but for the Apple Watch I'm not into that. Especially now that the screen goes edge to edge, having a small square of glass right in the middle just takes away from the beauty and functionality of the device. I know they make edge to edge glass protectors now, but in my experience they scratch easily and look horrible.So here is what I think of the Armor Suit!Firstly, it is a "Wet Install" protector. If you have any experience with the Zagg stuff from back in the iPhone 3G days then you know exactly what this means. The protectors come with a small spray bottle of solution that you damped your fingers and screen protect with before installing. This allows you to move the protector around and not have to hope you stick it down perfectly the first time.Not gonna lie, the install is not easy. Whenever I have to replace these (Which is not often anymore, more about that later), I usually have to set aside like a half hour just to get it started. Even after that, the solution between the protector and the screen sometimes takes up to an hour to dry, so it really is a constant babying situation.The toughest part about the install is the corners and sides of the watch face. Due to the curved glass, it can be rather difficult to get the film to sit down on the edges. You pretty much have to just go around with your fingers for a good 30 - 60 minutes until the solution dries. Not constantly the entire time, just every few minutes push it back down until the solution dries and the film finally sticks.Here is the main problem with these screen protectors, and a way that you can fix it:If at any time while you are smoothing the edges and corners into place, some debris gets in there, you will basically never get it out. This can be avoided by being careful though! Just make sure to apply the screen protector on a table, and don't try to use your watch until you are sure that the edges aren't going to come back up. Unfortunately, it does not matter how perfectly you install this product, at some point stuff will get under the edge of it, and it will begin to lift up. You will reach your hand into your pocket, and the edge of the protector will rub right up on the inside of your pocket. I though there was nothing to be done about this, and I HATED the way the the dirty edges of my watch looked, and hated that I had to constantly replace them every few weeks to avoid this (They do give you 6 though, so if you don't mind the way it looks or the constant reapplication, it should be all good).So with this major problem, why the 5 star review? Because I found a solution to the edge issue, and without that issue the screen protector does its job PERFECTLY, looks amazing, and feels great! (Yeah it feels like plastic and not glass, but I don't see anything wrong with that. If anything I like the feeling because it re-enforces the idea that my watch is protected.The solution I found was to get a cheap (I paid $6 for mine) plastic "Case" for your Apple Watch. The style that is super thin and just clips down on the sides of your watch, protecting the metal casing of the watch. What this does, is forces the edges of the screen protector up against the screen, and does not allow anything to get under it or lift it up. And even if your protector DOES lift up, the case covers up the unsightly air bubble or dusty edge (You can see this clearly in my pictures).Of course, some people may not want to cover up their beautiful stainless or ceramic watches with plastic cases, but I assume those people are not the sort of people looking for a screen protector either.Bottom Line: If you are looking for a thin, stylish, protective, and inexpensive way to keep your watch looking good for daily use AND keep it pristine throughout it's life, the combo of these Armor Suit protectors and a cheap clip on case works wonders!

    • V. L.

      Does the job, but I struggled

      It does a good job with keeping your screen safe but, I struggle with getting any protection screen on a device and I struggled with this one.

    • J. B.


      Product seems like it could be great. I like the idea of having functionality of the screen with the protection. My concern after getting this product was installation. Videos seemed fine, didn't seem like it would have been a challenge to install until I realized there was no solution for application. The bottle came completely empty. The package was marked "new" and all the supplies were present, except the solution in the bottle. It must have evaporated somehow or leaked out?Anyway. I placed it on anyway without the solution. We'll see how it holds up.

    • B.

      Ful coverage

      I do like these and they stick very very well. They dont come off easy like a more expensive brand name. You get six for the money so its a great deal. I drive truck and my watch is always catching on stuff and this one does not come off..But if you wear glasses you will need to take them off to put this on lol.

    • R. C.

      Holds up to my abuse

      I work in a very hands on job and the screen protector has done its job and protected my screen on my watch face.

    Similar Products from Smartwatch Screen Protectors

    Similar Products by ArmorSuit

    Product Disclaimer: All product information listed on the site are from 3rd party sources, including images and reviews. Binge.ae is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or binge support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. Binge.ae follows the rules and regulations of sale in United Arab Emirates and will cancel items in an order that are illegal for sale in United Arab Emirates. We take all the necessary steps to ensure only products for sale in United Arab Emirates are displayed. Product stock and delivery estimate may change with the seller even after placing the order. We strive to process your order as soon as it is finalized.